Community's Distributed Design Series of in-ceiling loudspeakers are designed to deliver exceptionally high quality sound with wide, uniform coverage. The series debuts Community's innovative Drop-Stop™ and Twist-Assist™ features, to make the installation process easier, faster and safer. Drop-Stop™ and Twist-Assist™ are unique features which really aid installation, providing that elusive 'third hand' installers frequently desire.
The D6 is available in standard black
(D6-B) or white (D6) finishes.
The Drop-Stop™ feature provides spring-loaded legs to support the back can on the included rails, so the installer no longer needs to hold the can against the tile while tightening the clamps. Installation Assistant Tabs snap over the C-Ring Support to temporarily hold the back can in place.
|Twist-Assist™ performs a similar function for the baffle assembly when the loudspeaker back cans are pre-installed to a conduit system for later termination. A simple twist of the baffle into the back can brings the Twist-Assist™ clips together so the baffle assembly is self-supporting while the installer fastens the screws.
Ranging from 4.5-inch to 10-inch systems, the series features seven models including five full-range, standard-depth back can designs, a low-profile model for installations where limited depth is available, and a 10-inch subwoofer system for applications where extra bass is needed. Each of the six full-range models is a true coaxial loudspeaker, with a compression driver concentrically located so that high frequencies emerge through the center of the low-frequency driver's magnetic structure and cone via a precisely contoured Tru-Phase™ HF waveguide.
Distributed Design Series loudspeakers come standard as a complete assembly, including everything needed for standard installations. The face portion only or the back can of each loudspeaker model can also be purchased separately. All systems are sold and shipped in pairs.
Loudspeaker grilles, C-Ring support plates, tile support bridge rails, cut-out template and paint masks are included with complete Distributed Design Series systems.
To purchase the face-only separately, order models D4-FO, D5-FO, D6-FO, D8-FO, D10-FO or D10SUB-FO.
Back Can Models:
To purchase the back can separately, order models D45-BC (for D4 or D5 back can), D6-BC (for D6 back can), D8-BC (for D8 back can) or D10-BC (for D10 or D10SUB back can).
Community's new FORECASTER HD Ceiling Distribution System Software is an easy-to-use engineering tool which calculates general design suggestions for distributed systems. To learn more and download the Forecaster HD free, visit here.
Technical Drawings here
Ease Focus/Ease/Ease GLL/Ulysses/CLF Data here
D-Series Accessory Guide
|Distributed Design Series Accessories
||D4/D5 Face Adapter Ring
Allows a D4 or D5 ceiling loudspeaker face-only assembly to be mounted into an existing industry back can.
D6 Face Adapter Ring
Allows a D6 ceiling loudspeaker face-only assembly to be mounted into an existing industry back can.
|D4/D5 Can Adapter Ring / Trim Ring
Allows an entire D4LP, D4 or D5 ceiling loudspeaker assembly to be mounted inside of an existing larger industry back can or into an existing but oversized ceiling hole.
||D6 Can Adapter Ring / Trim Ring
Allows an entire D6 ceiling loudspeaker assembly to be mounted inside of an existing larger industry back can or into an existing but oversized ceiling hole.
||D4/D5 New Construction Bracket
Optional bracket for installing D4LP, D4 or D5 loudspeakers in new construction before drywall or plaster is put into place.
||D6 New Construction Bracket
Optional bracket for installing D6 loudspeakers in new construction before drywall or plaster is put into place.
||D8 New Construction Bracket
Optional bracket for installing D8 loudspeakers in new construction before drywall or plaster is put into place.
||D10 New Construction Bracket
Optional bracket for installing D10 loudspeakers in new construction before drywall or plaster is put into place.