Skip to main content

C SERIES

C6

6.5-inch Coaxial Two-Way
Type
Ceiling Loudspeakers

The C6 has a more focused dispersion and a greater low frequency extension than the smaller C4. It contains a proprietary Tru-Phase™ waveguide that produces a consistently wide conical polar response up to 16 kHz. The C6 features a genuine coaxial design using separate magnets for the LF and HF drivers for reduced distortion and high sensitivity, thereby permitting up to 3 dB greater output level while requiring up to half the amplification power of competing products. The C SERIES ceiling loudspeakers are all ETL listed, and have similar sensitivity and output capabilities.

  • Finish: Corrosion-resistant zinc plated steel can, white paintable ABS baffle, white dual-layer powder-coated steel grille
  • Nominal Beamwidth (H x V): 120° Conical
  • 70V/100V Autoformer: 30W, 15W, 7.5W, 3.75W (@70V only)
  • Continuous Max Output: 109 dB (115 dB Peak) @ 8 ohms
  • Sensitivity (1W/1m): 91 dB
  • Transducers: LF - 1 x 6.5”, HF - 1 x .75 “ exit compression driver
  • Power Handling: 60W continuous @ 8 ohms
  • Dimensions (H x Dia): 6.5" x 9.8" (165 x 249 mm)
  • Operating Range: 70Hz – 13.5 kHz
C6-NCB
Optional new construction bracket for installing C6 or C6-B ceiling loudspeaker in new construction before drywall or paster is put into place.
C6-CATR
Can Adapter/Trim Ring for retrofit installations of a C6 ceiling loudspeaker into an existing larger industry back can or into an existing but oversized ceiling hole up to 11 inches (279mm) in diameter.
C SERIES Ceiling Accessory Guide