Skip to main content

I SERIES

IP8-1152

High Power 15-inch Two-Way Installation Loudspeaker
Type
High Power Point Source

I SERIES Point Source 800 loudspeakers provide exemplary acoustic performance, modular flexibility and elegant aesthetics for modern performance venues. Designed to support the goals of systems integrators and consultants both acoustically and mechanically, I SERIES includes a wide variety of arrayable, rotatable coverage patterns and a comprehensive selection of modular bracket systems that accelerate system design and system commissioning.

FEA-optimized linear suspensions, high-flux neodymium motors, and integral demodulation rings ensure precise control and very low distortion at high SPL levels. The custom long-excursion LF driver delivers deep bass response and a balanced midrange in the most demanding applications. The HF compression driver's non-metallic diaphragm provides natural, transparent sound quality that accurately reproduces and complements any source.

The rotatable 13-inch (330mm) HF waveguide provides well-defined coverage and a smooth off-axis response that enhances arrayability. Individually voiced crossovers produce proper beamwidth matching transitions and identical sonic signatures, permitting horn patterns to be mixed throughout an installation. Additionally, user selectable single amp or biamp operating modes expand application flexibility.

  • Finish: Black or White low gloss, uniformly textured painted 15mm Baltic Birch plywood with powder-coated steel grille; Outdoor (WR): 15mm PolyGlas™, Grey heavily textured exterior-rated coating with powder-coated marine-grade aluminum grille
  • Nominal Beamwidth (H x V): /26 (120° x 60°), /64 (60° x 40°), /66 (60° x 60°), /94 (90° x 40°), /96 (90° x 60°), /99 (90° x 90°)
  • Continuous Max Output (with processing): 123 dB (129 dB Peak)
  • Power Handling: 800W continuous @ 8 ohms
  • Sensitivity (1W/1m): 94 dB
  • Operating Range: 30 Hz – 22.4 kHz
  • Transducers: LF - 1 x 15" cone, 3” voice coil, demodulation ring, neodymium HF - 1 x 1.4" exit , 2.6” voice coil, ketone polymer diaphragm, neodymium compression driver
  • Dimensions (H x W x D): 30.80" x 16.50" x 20.07" (782 x 419 x 510 mm)
I SERIES BalancePoint™ Flyware Guide
BFR22HB
22" BalancePoint™ Horizontal Fly Rails (Black)
BFR22HW
22" BalancePoint™ Horizontal Fly Rails (White)
BFR22VB
22" BalancePoint™ Vertical Fly Rails (Black)
BFR22VW
22" BalancePoint™ Vertical Fly Rails (White)
DFSB
Downfill splay bracket kit (Black)
DFSW
Downfill splay bracket kit (White)
DVS-BFR22B
Downfill vertical splay kit for two vertical enclosures (Black)
DVS-BFR22W
Downfill vertical splay kit for two vertical enclosures (White)
HAB-BFR38B
Dual horizontal array kit for 2-way models (Black)
HAB-BFR38W
Dual horizontal array kit for 2-way models (White)
HSB-BFR22B
Dual horizontal splay kit for 2-way models (Black)
HSB-BFR22W
Dual horizontal splay kit for 2-way models (White)
HSB-SBR54B
Dual horizontal splay with extension kit for 2-way models (Black)
HSB-SBR54W
Dual horizontal splay with extension kit for 2-way models (White)
HSB-SBR54W
Dual horizontal splay with extension kit for 2-way models (White)
IAF40B
40" Isometric array frame (Black)
IAF40W
40" Isometric array frame (White)
IAF55B
55" Isometric array frame (Black)
IAF55W
55" Isometric array frame (White)
IUB1152B
U-bracket for IP-1152 (Black)
TPKB
Tight pack kit (Black)
TPKW
Tight pack kit (White)
VAB-BFR38B
Subwoofer above full-range vertical array (Black)
VAB-BFR38W
Subwoofer above full-range vertical array (White)
VAB-BFR38W
Subwoofer above full-range vertical array (White)
VSB-BFR22B
Dual vertical splay kit for 2-way models (Black)
VSB-BFR22W
Dual vertical splay kit for 2-way models (White)
VSB-SBR54B
Dual vertical splay with extension kit for 2-way models (Black)
VSB-SBR54W
Dual vertical splay with extension kit for 2-way models (White)
IVY1152B
Vertical yoke for IP-1152 (Black)
IVY1152W
Vertical yoke for IP-1152 (White)
IUB1152W
U-bracket for IP-1152 (White)
TRC400-8
400 Watt 70V/100V Line Transformer