Skip to main content

Intimate Performance Space

Slightly Sloped Seating

A smaller-sized performance venue may not present difficult acoustics. 
It might benefit well from either a point-source or line-source system. In this case, an IV6 Modular Vertical Array offers a wide range of capability from soft, articulate presentations to high impact music. The adjustable directivity offers the opportunity to tailor the coverage to exactly the shape of the space, maximizing the listener's experience and keeping music clear at all sound pressure levels.
Combining both types of IV6 array elements allows the array to address both close and far seating from a low trim height. Tightly packed 5-degree modules at the top focus sound to the rear seats while the bottom 
15-degree module wraps coverage down to the front rows that are very close to the stage. Passive attenuation assigned to modules in the array further smooths out the coverage uniformity.
 
To provide even bass coverage to all patrons, the subwoofer array uses slightly different delay and low pass settings to prevent narrowing the low-frequency coverage. This approach can apply as a design strategy for similar venues with wide prosceniums and a need for multiple subwoofers (for higher output).
Two (2) IV6 Arrays  
(Each array has [4] 1122/05 and 
[1] 1122/15 elements)
Two (mirror image) IV6 short arrays (increasing curvature from top to bottom) cover the entire space providing even SPL throughout utilizing progressive attenuation settings from our Passive Acoustic Optimization tool in EASE® Focus 3.
 
Four (4) IC6-1082/26   
Front fills provide localization for patrons near the stage. 
 
Four (4) IV6-118S subwoofers   
Two pair are positioned on their side panels back-to-back to maximize output while maintaining aisle space for the patrons in the front row.
Technical Considerations
 

Amplified Loudspeaker Controllers

Community recommends our series of Amplified Loudspeaker Controllers (ALC) for all Community loudspeaker applications, like those shown in this application guide. ALCs provide all of the signal routing, zone switching, DSP processing, protective limiting, remote monitoring, and amplification functions needed between a mixer and the loudspeakers in virtually any Community Professional Loudspeakers application. Standard Ethernet communication protocols allow for fast system design, system control, and remote system monitoring. Analog and Dante® inputs are included in each model, for quick and easy integration into any new or existing system. Community-authored loudspeaker presets include equalization, high pass filters, and multi-stage limiters tailored to each model, ensuring consistent sound quality and full loudspeaker protection in every application.

ALC Application Note

Total available power can be safely distributed asymmetrically across the outputs in any combination of low impedance and 70V/100V loads.  Power delivered from each output is individually managed; total shared power per ALC is monitored and limited independently by the power supply.

ALC-404D

4 inputs (Analog and/or Dante®)

4 channels of amplification and DSP processing

Each channel provides up to 400W of power into low impedance or 70V/100V loads, stable to 2Ω

In bridged mode, each pair of channels provides up to 800W into 8Ω, 4Ω, or 70V/100V loads

Total shared power not to exceed 1200W

Perfect for Small R SERIES, V SERIES, Compact I SERIES, W SERIES (W2), and ENT200 models, and zoned C SERIES & D SERIES applications

ALC-1604D

4 inputs (Analog and/or Dante®)

4 channels of amplification and DSP processing

Each channel provides up to 1600W of power into low impedance or 70V/100V loads, stable to 2Ω

In bridged mode, each pair of channels provides up to 3200W into 4Ω, or 70V/100V loads

Total shared power not to exceed 4800W

Perfect match for Larger R SERIES & W SERIES, I SERIES, IV6 and ENT-FR

ALC-3202D

2 inputs (Analog and/or Dante®)

2 channels of amplification and DSP processing

Each channel provides up to 3200W of power into low impedance or 70V/100V loads

In bridged mode, each pair of channels provides up to 6400W into 4Ω, or 70V/100V loads

Total shared power not to exceed 6400W

Perfect for R6-MAX, I SERIES Subwoofers and larger IV6 Arrays

 

Technical Information 

For power and full technical information refer to ALC spec sheets

For full DSP Settings/Tunings visit, here

 

Technical Support

Visit www.communitypro.com to learn more, or contact the Community TAG Team (Technical Applications Group) for technical and applications assistance at 1+ (610) 876-3400 or tagteam@communitypro.com

 

Design Guide

The Presentation & Performance Design Guide can be downloaded, here.

 

*Dante® is a registered trademark of Audinate Pty Ltd.